If your internet connection is down, you can still view live video and play back recorded video directly from your local Gateway. You need a device token to sign in. The token is obtained from the Arcules portal, so you need a device with internet access (for example, a phone on mobile data) to retrieve it.
How to Retrieve your Device Token to access the Gateway Offline
Go to the Sites page and find the Gateway
Click on the Gateway to bring up the right drawer
Select the Offline Access tab
Click on Retrieve your Device Token
Copy or write down the Current Token value, it will be needed in a following step.
Note: The token expires after 30 seconds, and a new token is generated automatically. Enter the current token promptly, and always use the latest one shown in the portal.
How do I access my gateway locally
Contact your local network administrator to obtain the gateway's IP address. You also might be able to view the IP address through the Sites page. It will have a format similar to YYY.YYY.YYY.YYY
You will need to access the IP address provided by the Network Administrator through Port 9000. So if your IP address was YYY.YYY.YYY.YYY, then in the browser enter YYY.YYY.YYY.YYY :9000
You will be prompted to enter the token. Enter it and click to proceed.
Click on Login
Here, you will be able to access the Live View as well as view available recorded footage locally on your Gateway.
Offline Gateway Access plays back the video that is still stored on the Gateway. How far back you can go depends on:
The retention configured on the Gateway,
The Gateway’s disk capacity, which is used up faster by high-resolution, high-bitrate cameras and continuous recording.
Video is removed when it reaches the retention period or when the disk reaches capacity, whichever comes first. Your cloud retention plan (for example 7 or 30 days) does not extend what is available offline.
Exporting video from the local Gateway
You can export recorded video directly from the local Gateway web client. Only video that is still stored on the Gateway (see above) can be exported.
Open a camera from a view. Make sure the player is in Playback mode.
Click the Export icon at the bottom right of the player, next to the fullscreen icon.
Set the Start time and End time. The Duration of your selection is shown at the bottom.
Click Create export.
To see your exports, click Exports at the top right of the page.
Note: Exports are written to the Gateway’s disk, so enough free disk space is needed. The longer the time range, the larger the export, so select only the period you need. If the disk is nearly full, the export may not complete.









