Skip to main content
All CollectionsVideo Analytics
Arcules Device Analytics for Hanwha
Arcules Device Analytics for Hanwha

Level-up your system with cameras that have Hanwha AI-based object detection

Updated this week

If you have Hanwha cameras that support AI-based object detection, you can use people and vehicle detections from them throughout your Arcules system.

Arcules Device Analytics work with:

  • Hanwha AI-based object detection compatible cameras

  • Any Arcules gateway based architecture - Edge or Cloud

    • Additional 20 to 100 Kbps bandwidth to the Arcules cloud per camera

    • See design considerations for more information

What can these analytics do?

  • Detect people and vehicles

  • Show results in Forensic Search

  • Trigger rules including alarms and notifications

  • Show on the playback timeline

  • Display widgets for people count, parked vehicle count, and people heat map

  • Use Cloud Analytics (if possible) for color search

  • See design considerations for more information

Configuring for Gateway-connected Hanwha Cameras

Arcules Device Analytics for Hanwha cameras enables people and vehicle detections, similar to Arcules Cloud Analytics. This will typically be deployed for cameras connected to edge gateways.

Summary

While people and vehicle detection can work in a few clicks, there are some design considerations you may want to review before these steps:

Enable people and/or vehicle detection in the Hanwha OS web interface

Firmware Supporting WiseAI

In your camera's Hanwha OS interface, go to the "Analytics" tab and choose WiseAI.

Then select "Object detection".


Ensure that the camera is streaming metadata — in the "System" pane, navigate to the "Analytics metadata" screen and click "Analytics Scene Description" if it is not already checked. Click Save.

For Firmware supporting Object Detection *AI

In your camera's Hanwha OS interface got to Analytics, and select Object analytics *AI

On the Object detection screen, check the box for Enable object detection at the top. On the right, make sure the boxes are checked for the objects you want the camera to report detections for.

NOTE: Hanwha has an object detection for License Plate, this does NOT enable License Plate Recognition to be passed to Arcules. This is not supported at this time.

Click Apply when done.

Enable device object detection in the Arcules web app

In the Arcules web app, navigate to the Devices pane and in your camera's device drawer, choose the "Analytics" tab.

  • Enable the "Object Detection" toggle.

  • Choose "Device" for the analytics source.

See troubleshooting if you these options aren't available.

  • Leave the Resemblance slider(s) for people and vehicle detection at the default level of Low unless you find you are getting too many false detections.

Configure rules (alarms and notifications)

  • Add Rule Regions to restrict the area of the field-of-view the triggers specific rules. For example, only trigger an alarm when vehicles are detected on the main pathway of the parking lot.

  • Click on the field-of-view to create a region of interest.

  • You can also restrict detections from being sent until the minimum number of objects are detected at the same time. In above screenshot, two vehicles need to be parked in this pathway for an associated rule to be triggered.
    ​

  • Click on the Rules icon or navigate to the Rules pane to create a rule(s) that are triggered by object detections from this camera.
    ​


    ​

  • Remember to apply the correct Rule Region if applicable.


​IMPORTANT NOTE: Make sure you are choose "Video" when you select a device type not "Camera Analytics" to use this functionality.

Configure widgets

  • You can create the same widgets on your dashboard as Arcules Cloud Analytics:

    • People Count: Provide hourly counts of people detected by a camera.

    • Heat Map: Determine the areas in a camera’s field of view that show higher numbers of people detections.

    • Parked Vehicle Count: Provide hourly counts of parked cars detected by a camera.

      See Add Widgets for additional information.

Forensic search

You can use people and vehicle detections in Forensic Search — see Forensic Video Search (using device analytics) for more information.

Object detections on playback

You can see people and vehicle detections on the playback timeline — see Playback for more information.

  • You might see people and vehicle detections on your playback timeline, or Forensic Search results, even though no video was recorded during the time of detection.
    ​

Design considerations and troubleshooting

Did this answer your question?